HS-360X Handheld DPM Scanner User Manual 1-15
Quick Start
Installing the HS-360X Interface Cable
1. Insert cable fully so that the connector is flush with the scanner surface.
2. Loosen metal lock plate screw using a PH1 driver.
3. Slide lock plate to fully locked position.
Inserting Cable into HS-360X
Important: Be sure the interface cable is pushed
all the way into the connector before closing and
fastening the lock plate.
Loosening HS-360X Lock Plate Screw
Sliding Lock Plate into Locked Position
To Next Page
Loading...
