1-18 HS-360X Handheld DPM Scanner User Manual
HS-360X Wired Handheld DPM Scanner
Connecting Power to the HS-360X (If Required)
If the host does not provide power to the scanner, connect an external power supply.
1. Plug the power supply into the power jack on the interface cable.
2. Plug the other end of the power supply into an AC outlet.
Configuring the HS-360X Scanner
Use the configuration symbols included in this manual, or WebLink
PC
software, to configure
the scanner.
HS-360X Accessories
The scanner ships with the HS-360X Wired Scanner Quick Start Guide. The following required
accessories
must be ordered:
• Interface cable for the appropriate interface.
• Universal power supply, if the interface requires this.
• HS-360X Stand for hands-free operation of the scanner.
To Next Page
Loading...
