HS-360X Handheld DPM Scanner User Manual A-91
Appendices
Date of First Programming
Attribute #614
Date of first electronic programming represents the first time settings where electronically
loaded to the scanner either by 123Scan or via SMS, for example
18MAY14 (which reads
the 18th of May 2014).
Type S
Size (Bytes) 7
User Mode Access R
Values Variable
Configuration Filename
Attribute #616
The name assigned to the configuration settings loaded electronically to the device either
by 123Scan or via SMS.
Note: Scanning the Set Defaults programming symbol automatically changes the config-
uration filename to
factory defaults.
To indicate the configuration settings loaded to the device were changed, the configuration
filename changes to
Modified upon scanning any parameter programming symbol.
Type S
Size (Bytes) 17
User Mode Access RW
Values Variable
Beeper/LED
Attribute #6000
Activates the beeper and/or LED.
Type X
Size (Bytes) N/A
User Mode Access W
Values:
Beep / LED Action Value
1 high short beep 0
2 high short beeps 1
3 high short beeps 2
4 high short beeps 3
5 high short beeps 4
1 low short beep 5
2 low short beeps 6
To Next Page
Loading...
