Omron MicroHAWK - Configuration Database Status

12-4 MicroHAWK Engine Integration Guide
Configuration Database Status
Configuration Database Status
Index
Exposure
Note: The Exposure parameter is read-only when the reader is in Continuous Read mode.
Gain
Pixel Binning
Important: Pixel Binning has no effect when the Image Dimension mode is configured as
Region of Interest in the Database Mode command. This is because the Window of
Interest camera settings are determined by the software based on the Region of Interest
setup. There is no benefit to Pixel Binning to increase processing speed when ROI is configured,
because the frame size would need to be increased to make Pixel Binning
possible.
Usage: Useful for applications that require several different complex reader configurations
to be applied sequentially. Multiple database indexes allow you to concatenate
configuration profiles, and to perform more complex operations than would
be possible with only one set of configuration parameters.
Definition: Determines the specific database index that will be used.
Serial Cmd:
< K255,index ,exposure,gain,pixel binning,row pointer,column pointer, row depth,
column width,symbology,morphology operator,morphology size>
Options: 1 to 10
Serial Cmd:
< K255, index, exposure ,gain,pixel binning,row pointer,column pointer,row depth,
column width,symbology,morphology operator,morphology size>
Default: 10,000
Options: 50 to 100,000
Serial Cmd:
< K255, index,exposure, gain ,pixel binning,row pointer,column pointer, row
depth,column width,symbology,morphology operator,morphology size>
Default: 25
Options: 0 to 100
Serial Cmd:
< K255, index,exposure,gain, pixel binning ,row pointer,column pointer,row
depth,column width,symbology,morphology operator,morphology size>
Default: Disabled
Options: 0 = Disabled 1 = Enabled