Omron MicroHAWK - EZ Trax Output

8-42 MicroHAWK Engine Integration Guide
EZ Trax Output
EZ Trax Output
Transfer Port
Host Port
Sends output using the current Host Port.
Image Mode
Good Read
Outputs the first Good Read image in the read cycle. The image file will immediately follow
the symbol data.
Usage: Useful for when you want to configure EZ Trax output using serial commands
instead of the EZ Trax graphic interface.
Definition: When EZ Trax output is enabled, the imager will attempt to output all
enabled EZ Trax options. EZ Trax will not function unless enabled.
Serial Cmd:
< K757,status ,transfer port,image mode,image format,image quality,object
info enable
,grade enable >
Default: Disabled
Options: 0 = Disabled 1 = Enabled
Definition: Selects the communication port that will be used to transfer image files.
Serial Cmd:
< K757, status, transfer port ,image mode,image format,JPEG quality,object
info enable
,grade enable >
Default: RS-232
Options: 0 = RS-232
3 = Ethernet TCP Port 1
4 = Ethernet TCP Port 2
Definition: Determines which read cycle condition triggers image file output.
Serial Cmd:
< K757, status,transfer port, image mode ,image format,image quality,object
info enable
,grade enable >
Default: Disabled
Options: 0 = Disabled
1 = Good Read
2 = No Read
3 = No Read and Good Read
4 = Mismatch