1-42 MicroHAWK Engine Integration Guide
Save Configuration in ESP
Edit the Job
After you have created a new job, loaded a job from your PC, or uploaded a job from the
camera, you will proceed to the Edit view to refine your machine vision job.
The Camera parameters allow you to set Gain, Exposure, Focus, Trigger, and Lighting.
Inspection Outputs options and Omron Microscan Link functionality allow you to
connect y
our job to the outside world.
This is also the view where you can add multiple tools to the job. The tool icons are
located above the main view area.
When a tool is selected, it appears in the tool list area to the left of the main view.
To Next Page
Loading...
