Omron MicroHAWK - Step 6 Locate the Symbol in the Field of View

1-22 MicroHAWK Engine Integration Guide
Locate the Symbol in the Field of View
Step 6 — Locate the Symbol in the Field of View
•In ESP’s EZ Mode, click the Locate button to enable the blue target pattern.
The symbol in the field of view will appear in the video view beneath the Locate and Calibrate
buttons, and you will see the blue target
pattern projected from the front of the reader.
• Center the target pattern on the symbol.
Important: The entire symbol should fall within the field of view (FOV) of the reader. The
field of view is what appears in ESP’s Locate/Calibrate window in EZ Mode.
• Click the Stop button to end the Locate function.