15-14 MicroHAWK Engine Integration Guide
Number of Filters
Number of Filters
Definition: Number of Filters refers to the number of active output filters. 0 disables all
output filters. Any non-zero numeral will enable filtering to be performed
using the filter indexes covered by this value.
For example, if the number of filters is 1, then only filter index # 1 will be
applied. If the number of filters is 2, then only filter index # 1 and filter index # 2
will be applied, etc.
Serial Cmd: <K745,number of filters>
Default: 0
Options: 0 to 10
To Next Page
Loading...
