MicroHAWK Engine Integration Guide A-17
Appendices
Image Resolution — The number of rows and columns of pixels in an image. A higher
resolution means that more pixels are available per element of the symbol being read.
Examples: 640 x 480 (VGA); 854 x 480 (WVGA); 1280 x 1024 (SXGA); 2048 x 1536 (QXGA).
Image Sensor — A device that converts a visual image to an electrical signal; a CCD or
CMOS array.
Initialize — Implement serial configuration commands into the imager’s active memory.
Input — A channel or communications line. Decoded data or a discrete signal that is
received by a device.
Integration — Exposure of pixels on a CMOS sensor.
Ladder Orientation — A linear symbol orientation in which the bars are parallel to the
symbol’s direction of travel.
Light-Emitting Diode (LED) — A semiconductor device that emits light when conducting
current.
Lens — A transparent piece of material with curved surfaces which either converge or
diverge light rays.
Machine Vision — The automatic acquisition and analysis of images to obtain desired
data for controlling a specific activity.
Multidrop — A communications protocol for networking two or more imagers or other
devices with a concentrator (or controller) and characterized by the use of individual
device addresses and the RS-485 standard.
Noise — The same as static in a phone line or “snow” in a television picture, noise is any
unwanted electrical signal that interferes with the image being read and transferred by the
imager.
Normally Closed — A discrete output state that is only active when open.
Normally Open — A discrete output state that is only active when closed.
Object Plane — An imaginary plane in the field of view, focused by an imager’s optical
system at the corresponding image plane on the sensor.
Output — A channel or communications line. Data or discrete signals that are transmitted
or displayed by a device.
Parity — An error detection routine in which one data bit in each character is set to 1 or 0
so that the total number of 1 bits in the data field is even or odd.
Picket Fence Orientation — A linear symbol orientation in which the bars are perpendicular
to the symbol’s direction of travel.
Pitch — Rotation of a linear or 2D symbol around an axis parallel to the symbol length on
the Substrate.
Pixel — An individual element in a digitized image array; “picture element”.
Port — Logical circuit for data entry and exit. (One or more ports may be included within a
single connector.)
Processing Time — The time used by a vision system to receive, analyze and interpret
image information. Often expressed in “parts per minute”.
To Next Page
Loading...
