7-35
H Communications Board
·The following Communications Boards are available.
Note TheRS-232Cportcanbe used if an RS-422/485conversionadapterisinstalled.
For ease of wiring, however, it is recommended that the RS-422/485 port be
used. The following information is for the RS-422/485 port.
Series Communications Board
model
Mounting method Specifications
SYSMAC CS1
Series
CS1W-SCB41 As an inner board
of the CPU Unit
· One RS-232C
port
· One RS-422/485
port
· Protocol macro
function
SYSMAC
C200HX/HG/HE
C200HW-COM06-EV1
Note Make sure that the
model number has
the suffix “EV1,”
otherwise the
CRC-16 check
code cannot be
used.
Mounted to an
optional slot of the
CPU Unit
· One RS-232C
port
· One RS-422/485
port
· Protocol macro
function
H Peripheral Devices
·The following peripheral devices are required to use the protocol macro function.
Name Model Specification
CX-Protocol WS02-PSTC1-E
The following peripheral devices support the protocol
macro function of the SYSMAC CS1 Series.
Personal computer environment
Personal
computer
IBM PC/AT or compatible computer
CPU Minimum requirement: Pentium 90 MHz
Recommended: Pentium 166 MHz or
faster
OS Microsoft Windows 95 or Windows 98
Memory Minimum: 16 MB
Recommended: 24 MB min.
Hard disk Minimum: Available space of 24 MB
Recommended: Available space of 50 MB
Monitor SVGA or better
Drive FDD: 1 or more
CD-ROM drive: 1 or more
Communications Chapter 7
To Next Page
Loading...
