Omron SYSDRIVE 3G3MV - Page 292

9-7
Initial settings, depending on inverter capacity
H 200V class 3--phase
No. Name Unit
-- Inverter capacity kW 0.1kW 0.25kW 0.55 kW 1.1 kW 1.5kW 2.2kW 4.0kW 5.5kW 7.5kW
n036 Motor rated current A 0.6 1.1 1.9 3.3 6.2 8.5 19 19.6 26.6
n105 Torque compensation
iron loss
W 1.7 3.4 4.2 6.5 11.1 11.8 19 28.8 43.9
n106 Motor rated slip Hz 2.5 2.6 2.9 2.5 2.6 2.9 3.3 1.5 1.3
n107 Motor phase to
neutral*
W 17.99 10.28 4.573 2.575 1.233 0.8 0.385 0.199 0.111
n108 Motor leak inductance MH 110.4 56.08 42.21 19.07 13.4 9.81 6.34 4.22 2.65
n110 Motor no--load current % 72 73 62 55 45 35 32 26 30
H 200V class single--phase
No. Name Unit
-- Inverter capacity kW 0.1kW 0.25kW 0.55 kW 1.1 kW 1.5kW 2.2kW -- 4.0kW
n036 Motor rated current A 0.6 1.1 1.9 3.3 6.2 8.5 -- 19
n105 Torque compensation
iron loss
W 1.7 3.4 4.2 6.5 11.1 11.8 -- 19
n106 Motor rated slip Hz 2.5 2.6 2.9 2.5 2.6 2.9 -- 3.3
n107 Motor phase to
neutral*
W 17.99 10.28 4.573 2.575 1.233 0.8 -- 0.385
n108 Motor leak inductance MH 110.4 56.08 42.21 19.07 13.4 9.81 -- 6.34
n110 Motor no--load current % 72 73 62 55 45 35 -- 32
H 400V class 3--phase
No. Name Unit
-- Inverter capacity kW 0.37kW 0.55 kW 1.1 kW 1.5kW 2.2kW 3.0kW 4.0kW 5.5kW 7.5kW
n036 Motor rated current A 0.6 1.0 1.6 3.1 4.2 5.5 7.0 9.8 13.3
n105 Torque compensation
iron loss
W 3.4 4.0 6.1 11.0 11.7 19.3 19.3 28.8 43.9
n106 Motor rated slip Hz 2.5 2.7 2.6 2.5 3.0 3.2 3.2 1.5 1.3
n107 Motor phase to
neutral*
W 41.97 19.08 11.22 5.044 3.244 1.514 1.514 0.797 0.443
n108 Motor leak inductance MH 224.3 168.8 80.76 53.25 40.03 24.84 24.84 16.87 10.59
n110 Motor no--load current % 73 63 52 45 35 33 33 26 30
* Values of motor phase to neutral are set to half of the standard value
Specifications Chapter 9