Omron SYSDRIVE 3G3MV - Page 32

2-9
H Removing the Terminal Cover
D 0.2- to 3.7-kW Inverters
· After the front cover is removed, press the left and right sides of the terminal cover in
thearrow1directionsandlifttheterminalcoverinthearrow2directionasshowninthe
following illustration.
D 5.5-/7.5-kW Inverters
· Loosen the terminal cover screws in the direction of arrows 1.
· Presstheleftandrightsidesoftheterminalcoverinthedirectionofarrows2andliftitin
the direction of arrow 3 as shown in the following illustration.
Note None of the following 200-V models have a terminal cover. Instead, the front
cover is used as a terminal cover.
3G3MV-A2001 (0.1 kW), 3G3MV-A2002 (0.2 kW), 3G3MV-A2004 (0.4 kW),
3G3MV-A2007 (0.75 kW), 3G3MV-AB001 (0.1 kW), 3G3MV-AB002 (0.2 kW),
and 3G3MV-AB004 (0.4 kW)
Design Chapter 2