!
!
!
!
!
!
!
!
!
!
4-2
WARNING Turn ON the input powersupply onlyafter mountingthe front cover,
terminal covers, bottom cover, Operator, and optional items. Not
doing so may result in electrical shock.
WARNING Do not remove the front cover, terminal covers, bottom cover,
Operator, or optional items while the power is being supplied. Not
doing so may result in electrical shock.
WARNING Do not operate the Operator or switches with wet hands. Doing so
may result in electrical shock.
WARNING Do not touch the inside of the Inverter. Doing so may result in
electrical shock.
WARNING Donotcomeclosetothemachinewhenusingtheerrorretryfunction
becausethemachinemayabruptlystartwhenstoppedby analarm.
Doing so may result in injury.
WARNING Do not come close to the machine immediately after resetting
momentary power interruption to avoid an unexpected restart (if
operation is set to becontinued in the processing selectionfunction
after momentary power interruption isreset).Doing somay result in
injury.
WARNING Provide a separate emergency stop switch because the STOP Key
on the Operator is valid only when function settings are performed.
Not doing so may result in injury.
WARNING BesureconfirmthattheRUNsignalisturnedOFFbeforeturningON
the power supply, resetting the alarm, or switching the
LOCAL/REMOTE selector. Doing sowhile theRUN signal isturned
ON may result in injury.
Caution Be sure to confirm permissible ranges of motors and machines
beforeoperationbecausetheInverterspeedcanbe easilychanged
from low to high. Not doing so may result in damage to the product.
Caution Provide a separate holding brake when necessary. Not doing so
may result in injury.
Test Run Chapter 4
To Next Page
Loading...
