Omron ZEN User Manual

x
Visual Aids
The following headings appear in the left column of the manual to help you locate
different types of information.
Note Indicates information of particular interest for efficient and convenient
operation of the product.
1,2,3... 1. Indicates lists of one sort or another, such as procedures,
checklists, etc.
Precautions for Correct Use
Indicates precautionary information that should be heeded to ensure
correct use of the ZEN.
Precautions for Safe Use
Indicates precautionary information that should be heeded to ensure
safe use of the ZEN.
Indicate the buttons that needs to be pressed in operating
procedures. Press each button once.
Indicate buttons that needs to be pressed in operating procedures.
Press one of the buttons once or more.
▲ ▼
Indicates that the display (the word “LANGUAGE” in this case) is
flashing. In this manual, this state is described by saying that the
“flashing cursor” is at the word “LANGUAGE”. In this state it is
possible to change settings and the position of the cursor.
LANGUAGE
Indicates that the display (the letter “H” in this case) is flashing in
reverse video. In this manual, this state is described by saying that
the “highlighted cursor” is at the word “H”. In this state it is not
possible to change settings but the cursor can be changed to the
flashing cursor by pressing the OK button.
RUN
PARAMETER
SET CLOCK
LANGUAGE
ENGLISH
 OMRON, 2006
All rights reserved. No part of this publication may be reproduced, stored in a retrieval
system, or transmitted, in any form, or by any means, mechanical, electronic, photocopying,
recording, or otherwise, without the prior written permission of OMRON.
No patent liability is assumed with respect to the use of the information contained herein.
Moreover, because OMRON is constantly striving to improve its high-quality products, the
information contained in this manual is subject to change without notice. Every precaution
has been taken in the preparation of this manual. Nevertheless, OMRON assumes no
responsibility for errors or omissions. Neither is any liability assumed for damages resulting
from the use of the information contained in this publication.
Z211-E1-03.book Page x Friday, November 21, 2008 10:38 AM

Omron ZEN Specifications

General

Display	LCD
Mounting Type	DIN Rail
Operating Temperature	-10 to 55°C
Power Supply Voltage	100-240V AC
Output Type	Relay, Transistor
Number of Outputs	4-8
Programming Language	Ladder Logic