Omron ZEN User Manual

133
Appendix C
Operating Mode at Startup
The operating mode at startup depends on the model and the presence of a user
program as shown in the following table.
Yes: Indicates that the user ladder program and parameter settings are correctly written.
No: Indicates that the user ladder program and parameter settings are not written or
that the data is not correct.
User
program
In CPU No Yes No Yes
In Memory
Cassette
No No Yes Yes
LCD-type CPU Unit STOP
mode
RUN mode
with program in
CPU
STOP mode
with program in
Memory Cassette
RUN mode
with program in
CPU
LED-type CPU Unit
(without LCD)
STOP
mode
RUN mode
with program in
CPU
RUN mode
with program
automatically
loaded from
Memory Cassette
RUN mode
with program
automatically
loaded from
Memory Cassette
Z211-E1-03.book Page 133 Friday, November 21, 2008 10:38 AM

Omron ZEN Specifications

General

Display	LCD
Mounting Type	DIN Rail
Operating Temperature	-10 to 55°C
Power Supply Voltage	100-240V AC
Output Type	Relay, Transistor
Number of Outputs	4-8
Programming Language	Ladder Logic