169
Revision History
A manual revision code appears as a suffix to the catalog number on the front cover of
the manual.
The following table outlines the changes made to the manual during each revision. Page
numbers refer to the previous version.
Revision
code
Date Revised content
01 February 2006 Original production
02 September 2006 Page xv: Caution at bottom of page altered.
Page xvii: Description on “stranded wires” removed from item 4
under Installation and Wiring.
Page xxi: Item 4 removed.
Page 36: Step 1 replaced at bottom of page.
Page 36: Figure at bottom of page replaced.
Page 40: First paragraph removed and information on “twisted
wires” removed. Caution on tightening torque altered.
Pages 44 and 45: Graphics at bottom of page altered.
Page 48: Graphics in 2nd, 4th, and 5th rows of table altered.
Page 52: First two paragraphs rewritten.
Page 102: Information added to precaution.
Page 119: Power consumption for “ZEN-10C3AR-A-V2” changed,
inrush currents changed, and terminal block specification
changed.
Page 121: “Pending approval” removed.
Page 126: Text in circuit drawing changed.
Page 136: Inrush current rows added to table.
Page 140: “DC power supply voltage” row moved to under “DC
input circuits” and changed to “input voltage.”
02A May 2007 Page 23: Line for bottom arrow corrected.
Page 42: Top heading corrected.
Page 107: Description for NZ Type changed from "last Sunday" to
"third Sunday."
Page 120: Specification for vibration resistance changed from
"double amplitude" to "single amplitude."
03 December 2008 Page 13: Added Vista for operating system of compatible comput-
ers.
Page 107: Changed times according to changes in summer time
laws.
Cat. No. Z211-E1-03
Revision code
Z211-E1-03.book Page 169 Friday, November 21, 2008 10:38 AM
To Next Page
Loading...
