58
Setting the Date and Time Section 3-2
3-2 Setting the Date and Time
The date and time are not set when the product is shipped. The date and
time must be set before the ZEN can be used. LED-type CPU Units (ZEN-
@0C2@@-@-V2) do not have a calendar and clock function.
Press the OK Button to display the submenu
for clock settings. Select SET CLOCK from
the submenu.
Press the OK Button to display the current
date and time settings. The right digit of the
date will be highlighted and flashing.
Current time: hh:mm (day)
Current date: yy/mm/dd
Press the OK Button to
change from a highlighted
cursor to a flashing cursor
and enable data to be
changed.
Set the date and time.
Use the Up/Down Buttons to change the
setting.
Use the Left/Right Buttons to move the
cursor.
The day will automatically change when the
date is set.
Press the OK Button to display a
confirmation message.
Press the OK Button to confirm and
complete the setting.
Precautions for Correct Use
If the power supply is turned OFF for two days or more at 25°C, the
date and time will return to the default setting (00/1/1; 00:00 (SA)).
PROGRAM
RUN
PARAMETER
SET CLOCK
▼
Select SET
CLOCK.
SET CLOCK
SUMMER TIME
SET CLOCK
yy/mm/dd
00/01/0
00:03(SA)
SET CLOCK
yy/mm/dd
00/01/01
00:03(SA)
Days of the week
SU: Sunday
MO: Monday
TU: Tuesday
WE: Wednesday
TH: Thursday
FR: Friday
SA: Saturday
SET CLOCK
yy/mm/dd
00/04/01
11:35(SU)
SET CLOCK
SET?
OK/ESC
11:35(SU)
Z211-E1-03.book Page 58 Friday, November 21, 2008 10:38 AM
To Next Page
Loading...
