73
Correcting Ladder Programs Section 3-5
Press the ALT Button to reserve a 1-line
space between the parallel inputs.
The vertical connection lines will be
automatically extended.
Note A blank line cannot be inserted if an input or connection line is
written in the last line (the 96th line).
3-5-5 Deleting Blank Lines
To delete a blank line, move the highlighted
cursor to the input position at the beginning
of the line to be deleted and press the DEL
Button.
Press the DEL Button to delete one blank
line. All following lines will move up one.
Note A line must be blank to be deleted, i.e., lines containing inputs
and outputs cannot be deleted.
Blank line
Move the high-
lighted cursor to the
beginning of the
line to be deleted.
This line will be deleted.
▼
Z211-E1-03.book Page 73 Friday, November 21, 2008 10:38 AM