103
Protecting Programs Section 4-1
4-1-1 Setting a Password
Press the OK Button to change to a flashing
cursor and enable a password to be set.
Set the password.
Use the Left and Right Buttons to move to
the digit to be changed.
Use the Up/Down Buttons to input a numeral
between 0 and 9.
Press the OK Button. A confirmation
message will be displayed.
Note The display will automatically change to the Waiting for Password
Input Screen when making settings that require a password to be
input. Use the same method as outlined above to input the
registered password.
4-1-2 Deleting Registered Passwords
Press the OK Button to change to a flashing
cursor and to enable password setting.
Input the registered password.
Use the Left and Right Buttons to move to
the digit to be changed.
Use the Up/Down Buttons to input a numeral
between 0 and 9.
PARAMETER
SET CLOCK
LANGUAGE
OTHER
▲
Select
Other.
PASSWORD
BACKLIGHT
INPUT FILTER
SYSTEM INF
Select
Password.
PASSWORD
0000
PASSWORD
1234
PASSWORD
SET?
OK/ESC
1234
The icon will appear at the bottom right of
the screen when a password has been
registered.
PASSWORD
BACKLIGHT
INPUT FILTER
SYSTEM INF
Select Other/Password.
PASSWORD
0000
PASSWORD
1234
Z211-E1-03.book Page 103 Friday, November 21, 2008 10:38 AM
To Next Page
Loading...
