Omron ZEN - Page 166

142
Version Upgrades Appendix D
Compatibility of Programs Depending on Support Software Version
Note 1. The display functions (display clear: -CD@ and day/month
display: DAT1) cannot be used and will be ignored.
2. Only the memory area ranges supported by the pre-V1 CPU
Units can be used for Timers, Holding Timers, Counters, Weekly
Timers, Calendar Timers, and Displays (i.e., only half of each).
3. Twin timer operation for timers, multiple-day operation and pulse
operation for weekly timers, the 8-digit counter, and 8-digit
comparators cannot be used. New Zealand and Australia cannot
be set for Daylight Saving Time (DST).
CPU Unit system software Support Software
Ver. 1.0
ZEN-SOFT01
Ver. 2.0
ZEN-SOFT01-
V2
Ver. 3.0
ZEN-SOFT01-
V3
Ver. 4.1
ZEN-SOFT01-
V4
Ver. 1.0 (Pre-V1 Units) OK OK Restrictions
(See notes 1
and 2.)
Restrictions
(See notes 1,
2, and 3.)
Ver. 1.1 (Pre-V1 Units) Restrictions
(See note 1.)
OK Restrictions
(See note 2.)
Restrictions
(See notes 2
and 3.)
Ver. 2.0
(V1 CPU
Units)
10 I/O points Restrictions
(See notes 1
and 2.)
Restrictions
(See note 2.)
OK Restrictions
(See note 3.)
20 I/O points Not
applicable.
Not
applicable.
OK Restrictions
(See note 3.)
Ver. 3.0 (V2 CPU Units) Not
applicable.
Not
applicable.
Not
applicable.
OK
Z211-E1-03.book Page 142 Friday, November 21, 2008 10:38 AM