OPTIMedical OPTI CCA-TS - Page 107

6-2 Operator’s Manual – OPTI CCA-TS
6 MAINTENANCE
3. Use the numeric keypad to enter the password
(factory default 404) (Fig. 6-2).
4. Use the alphanumeric keypad to enter the
Operator ID or press to bypass this
function (Fig. 6-3).
NOTE: IfOperatorIDisconguredas“required”
inSetup,youcannotgotothenextstep
unlessavalidOp.IDisentered.
NOTE: IfSecureOp.IDsisactivatedunderSetup,
youwillbepromptedforyour4-digitPIN#
insteadofyourOp.ID.
NOTE: Bar-codedOperatorIDsmaybeentered
usingthebarcodescanner.
Fig. 6-3 Enter Operator ID
Fig. 6-2 Enter Password