1-4 Operator’s Manual – OPTI CCA-TS
The analyzer activities are communicated to you
through a backlit Touch screen, displaying the
activities of the analyzer, sample results and other
relevant information.
You communicate with the analyzer through a
graphical user interface. The graphic interface is a
touch screen used to perform all analyzer functions.
(Fig. 1-2).
To the right of the display is a two-color status light
(Fig. 1-3). During operation you will see one of the
following:
• Green Light: System is ready for measurement.
• Blinking Green Light: System is in process
of calibration or measurement. Do not open the
cover.
• Red Light: Major error has occurred, system
has stopped.
• Blinking Red Light: System has encountered a
problem and needs operator interaction before it
will proceed.
Inside the top of the unit is the Sample
Measurement Chamber (SMC) for the OPTI
Cassette. To open the cover, depress the button, and
the cover will pop up (Fig. 1-4).
Several LEDs and two infrared lasers are located
inside the sample measuring chamber.
Fig. 1-2 Touch Screen
Fig. 1-4 Open SMC Cover
Fig. 1-3 Status Light
Touch Screen
Status Light
Sample Measurement Chamber
(SMC)
To Next Page
Loading...