EasyManua.ls Logo

Optos P200TE - 2.4 Target environment; 2.5 Contraindications; 2.6 System configuration

Optos P200TE
374 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 2 - Introduction
The system prevents the operator altering laser power or exposure times, therefore no specific pre-requisite
training is required prior to receiving Optos training. The review of images, as an assist to diagnosis, may only
be conducted by a healthcare professional qualified in optometry or ophthalmology.
2.4 Target environment
The device may be operated in an ophthalmology clinic, hospital environment or in an optometrist's commercial
premises.
2.5 Contraindications
There are NO known contraindications for this device.
2.6 System configuration
The system configuration must include a scan head and an image server. Images are captured on the scan
head and are reviewed on the image server.
The scan head is connected to the touch screen, hand control and image server.
The image server runs the OptosAdvance software which allows you to review and analyze patient images.
Administrators can also manage images located on local or network resources.
Any browser-based review clients connected to your network can be used to review and analyze patient images.
Page 22 of 75 Part Number: G108707/8GME
English Copyright 2018, Optos plc. All rights reserved.

Table of Contents

Related product manuals