Chapter 4 - Technical Specification
4.1.2 Connections
These connections are NOT intended to be detached by the user.
M13385001
100-240V AC
T5A H250V
1
2
3
4
FIGURE 18: Sample of the connection label
No. Description
1
Mains power cable and switch
l Protective earth must be fitted.
l U.K. Power Cable Fuse: 13A
2 Network cable
3 Hand control and Optos Service use
4 Touch screen
4.1.3 Scan head dimensions
The scan head, hand control and touch screen should be placed on a table which meets the table specification,
see Table requirements on the facing page. There should be adequate clearance around the table to operate
the device.
The image server, switch and any browser-based review clients or monitors must be positioned outside the
patient environment; more than 1.5 meters (5 ft) from the scan head.
TABLE 8: Scan head dimensions
Dimension Details
Width 550mm (22 inches)
Depth 570mm (23 inches) including chin rest
Height 608mm to 632mm (24inches to 25inches)
Weight 40 kg (89 lbs)
Door access width 760 mm (30 inches)
Page 64 of 75 Part Number: G108707/8GME
English Copyright 2018, Optos plc. All rights reserved.
To Next Page
Loading...
