Chapter 4 - Technical Specification
For transmitter rated at a maximum output power NOT listed above, the recommended separation distance d in
meters (m) can be estimated using the equation applicable to the frequency of the transmitter, where P is the
maximum output power of the transmitter in watts (W) according to the transmitter manufacturer.
Note
l At 80MHz and 800MHz the higher frequency range applies.
l
These guidelines may NOT apply in all situations. Electromagnetic propagation is affected by
absorption and reflection from structures, objects and people.
Page 70 of 75 Part Number: G108707/8GME
English Copyright 2018, Optos plc. All rights reserved.
To Next Page
Loading...
