Oracle Netra SPARC T4-1B - Install the ID PROM

102 Netra SPARC T4-1B Server Module Service Manual • June 2012
3. Lift the ID PROM (panel 1) straight up from its socket (panel 2).
Place the ID PROM on an antistatic mat.
4. Install the ID PROM.
See “Install the ID PROM” on page 102.
Related Information
■ “Install the ID PROM” on page 102
■ “Verify the ID PROM” on page 103
▼ Install the ID PROM
1. (If needed) Remove the ID PROM.
See “Remove the ID PROM” on page 101.
2. Locate the ID PROM socket on the motherboard (panel 1).