Oracle Netra SPARC T4-1B - List FRU Status (Prtdiag Command)

Detecting and Managing Faults 25
2. Type.
Or, if you want to view all logged messages, type:
Related Information
■ “Check the Message Buffer (dmesg Command)” on page 24
▼ List FRU Status (prtdiag Command)
● At an Oracle Solaris OS command line, type the prtdiag command.
FRU status information is displayed.
Example:
# more /var/adm/messages
# more /var/adm/messages*
# prtdiag
System Configuration: Oracle Corporation sun4v Netra SPARC T4-1B
Memory size: 32256 Megabytes
================================ Virtual CPUs ================================
CPU ID Frequency Implementation Status
------ --------- ---------------------- -------
0 2548 MHz SPARC-T4 on-line
1 2548 MHz SPARC-T4 on-line
2 2548 MHz SPARC-T4 on-line
<...>
<...>
61 2548 MHz SPARC-T4 on-line
62 2548 MHz SPARC-T4 on-line
63 2548 MHz SPARC-T4 on-line
======================= Physical Memory Configuration ========================
Segment Table:
--------------------------------------------------------------
Base Segment Interleave Bank Contains
Address Size Factor Size Modules
--------------------------------------------------------------
0x0 32 GB 2 16 GB /SYS/MB/CMP0/BOB0/CH0/D0
/SYS/MB/CMP0/BOB0/CH1/D0
/SYS/MB/CMP0/BOB1/CH0/D0
/SYS/MB/CMP0/BOB1/CH1/D1