89
Servicing the REM
The server module supports the installation of one REM. For a list of supported
REMs, refer to the Netra SPARC T4-1B Server Module Product Notes.
Related Information
■ “Detecting and Managing Faults” on page 5
■ “Preparing for Service” on page 51
▼ Remove a REM
1. Prepare for service.
See “Preparing for Service” on page 51.
2. Lift the REM ejector arm (panel 1).
Description Links
Troubleshoot a REM
problem.
Refer to the documentation for the REM.
Replace a REM. “Remove a REM” on page 89
“Install a REM” on page 90
Install a REM. “Install a REM” on page 90
To Next Page
Loading...
