113
Replacing the Server Module
Enclosure Assembly (Motherboard)
When certain parts and components in the server module, such as the motherboard,
require replacing, you must replace a high-level assembly called the enclosure
assembly. This includes a new server module chassis with the motherboard and many
other components already installed.
If you determine that a faulty component is not one of the replaceable FRUs
described in this document, the enclosure assembly must be replaced.
Note – This procedure must be performed by an Oracle field service representative.
■ “Transfer Components to Another Enclosure Assembly” on page 113
Related Information
■ “Identifying Components” on page 1
■ “Detecting and Managing Faults” on page 5
■ “Preparing for Service” on page 51
▼ Transfer Components to Another
Enclosure Assembly
When you replace an enclosure assembly, you must move a number of FRUs from the
original server module to the same locations in the replacement enclosure assembly.
To Next Page
Loading...
Need help?
General
