Oracle Netra SPARC T4-1B - Locate the Server Module; Preparing the Server Module for Removal; Remove the Server Module from the Modular System

56 Netra SPARC T4-1B Server Module Service Manual • June 2012
Related Information
■ “Locate the Server Module” on page 56
■ “Find the Modular System Chassis Serial Number” on page 54
▼ Locate the Server Module
To identify a specific server module from others in the modular system, perform the
following steps.
1. Log in to Oracle ILOM on the server module you plan to locate.
2. Type.
The Locator LED on the server module blinks.
3. Identify the server module with a blinking white LED.
4. Once you locate the server module, press the Locator LED to turn it off.
Note – Alternatively, you can turn off the Locator LED by typing the Oracle ILOM
set /SYS/LOCATE value=off command.
Related Information
■ “Remove the Server Module From the Modular System” on page 61
Preparing the Server Module for
Removal
There are several ways to shut down the server module before you remove it from
the chassis.
-> set /SYS/LOCATE value=fast_blink