48 Netra SPARC T4-1B Server Module Service Manual • June 2012
Related Information
■ “View System Message Log Files” on page 24
■ “Disable System Components” on page 48
■ “Enable System Components” on page 49
▼ Disable System Components
You disable a component by setting its component_state property to Disabled.
This action adds the component to the ASR blacklist.
/SYS/MB/CMP0/MCU0 | component_state | Enabled
/SYS/MB/CMP0/MCU1 | component_state | Enabled
/SYS/MB/CMP0/NIU0 | component_state | Enabled
/SYS/MB/CMP0/NIU1 | component_state | Enabled
/SYS/MB/CMP0/ | component_state | Enabled
NIU_CORE | |
/SYS/MB/CMP0/PEX | component_state | Enabled
/SYS/MB/CMP0/PEU0 | component_state | Enabled
/SYS/MB/CMP0/PEU1 | component_state | Enabled
/SYS/MB/CMP0/BOB0/ | component_state | Enabled
CH0/D0 | |
/SYS/MB/CMP0/BOB0/ | component_state | Enabled
CH1/D0 | |
/SYS/MB/CMP0/BOB1/ | component_state | Disabled
CH0/D0 | |
/SYS/MB/CMP0/BOB1/ | component_state | Enabled
CH1/D0 | |
/SYS/MB/CMP0/BOB2/ | component_state | Enabled
CH0/D0 | |
/SYS/MB/CMP0/BOB2/ | component_state | Enabled
CH1/D0 | |
/SYS/MB/CMP0/BOB3/ | component_state | Enabled
CH0/D0 | |
/SYS/MB/CMP0/BOB3/ | component_state | Enabled
CH1/D0 | |
/SYS/MB/GBE | component_state | Enabled
/SYS/MB/USB | component_state | Enabled
/SYS/MB/VIDEO | component_state | Enabled
/SYS/MB/PCI- | component_state | Enabled
SWITCH0 | |
/SYS/MB/PCI- | component_state | Enabled
SWITCH1 | |
->