36 Netra SPARC T4-1B Server Module Service Manual • June 2012
5. If you receive POST error messages, learn how to interpret them.
See “Interpret POST Fault Messages” on page 37.
Related Information
■ “POST Overview” on page 29
■ “Oracle ILOM Properties That Affect POST Behavior” on page 30
■ “Configure POST” on page 33
■ “Interpret POST Fault Messages” on page 37
■ “Clear POST-Detected Faults” on page 37
[CPU 0:0:0] NOTICE: Serial#:
0000000000000000.000900802c1cf133
[CPU 0:0:0] NOTICE: Version: 003e003012030607
[CPU 0:0:0] NOTICE: T4 Revision: 1.2
[CPU 0:0:0] NOTICE: MCU0: Memory Capacity is 64GB
[CPU 0:0:0] NOTICE: MCU1: Memory Capacity is 64GB
[CPU 0:0:0] NOTICE: Usable strands: ffffffffffffffff
[CPU 0:0:0] NOTICE: System memory capacity is 128GB
[CPU 0:0:0] NOTICE: Clocks: CMP: 2848 MHz DRAM: 533 MHz (6.4 Gbps)
CL: 1466 MHz (8.8 Gbps)
[CPU 0:0:0] NOTICE: Initializing TSR Hoovers
[CPU 0:0:0] NOTICE: Initializing FSR Hoovers
[CPU 0:0:0] NOTICE: Initializing MCU 0 serdes
[CPU 0:0:0] NOTICE: Initializing MCU 1 serdes
[CPU 0:0:0] NOTICE: Updating Config Information for Guest Manager
<...>
<...>
2011-08-30 00:47:29.301 0:0:0>| NODE:PORT 0:1 | AST2200 |
Addr: f850.01000000 | BDF 16: 0:0 | VID-1a03 | DID-1150 | Width=01
G1 |
2011-08-30 00:47:29.351 0:0:0>| NODE:PORT 0:1 | AST2100 Display
| Addr: f850.01100000 | BDF 17: 0:0 | VID-1a03 | DID-2000 | Width=
00 G0 |
2011-08-30 00:47:31.388 0:0:0> PCIE PROBE Node 0 port 1,
devices found = 12
2011-08-30 00:47:31.404 0:0:0> PCIE PROBE devices found = 23
2011-08-30 00:47:31.439 0:0:0>End : Probe PCI Devices
2011-08-30 00:47:31.452 0:0:0>Begin: Network Tests
2011-08-30 00:47:31.496 0:0:0>End : Network Tests
2011-08-30 00:47:31.555 0:0:0>INFO:
2011-08-30 00:47:31.563 0:0:0> POST Passed all devices.
2011-08-30 00:47:31.576 0:0:0>POST: Return to Host Config.
[CPU 0:0:0] NOTICE: Reconfiguring System
To Next Page
Loading...
Need help?
General
