Oracle Netra SPARC T4-1B User Manual

12 Netra SPARC T4-1B Server Module Service Manual • June 2012
■ “Check for Faults (show faulty Command)” on page 18
■ “Check for Faults (fmadm faulty Command)” on page 20
■ “Clear Faults (clear_fault_action Property)” on page 21
■ “Service-Related Oracle ILOM Commands” on page 22
■ “Oracle ILOM Properties That Affect POST Behavior” on page 30
Related Information
■ “Diagnostics Overview” on page 5
■ “Diagnostics Process” on page 7
■ “Interpreting Log Files and System Messages” on page 23
■ “Managing Faults (PSH)” on page 41
■ “Managing Faults (POST)” on page 29
■ “Managing Components (ASR)” on page 45
■ “Checking if Oracle VTS Software Is Installed” on page 27
■ “POST Overview” on page 29
■ “Oracle ILOM Properties That Affect POST Behavior” on page 30
Oracle ILOM Troubleshooting Overview
Oracle ILOM enables you to remotely run diagnostics, such as POST, that would
otherwise require physical proximity to the server module. You can also configure
Oracle ILOM to send email alerts of hardware failures, hardware warnings, and other
events related to the server module or Oracle ILOM.
The SP runs independently of the server module, using the server module’s standby
power. Therefore, Oracle ILOM continues to function when the server module OS
goes offline or when the server module is powered off.
Fault Management
Error conditions detected by Oracle ILOM, POST, and PSH are forwarded to Oracle
ILOM for fault handling.

Oracle Netra SPARC T4-1B Specifications

General

Brand	Oracle
Model	Netra SPARC T4-1B
Category	Server
Language	English