Orion FLEX Series User Manual

3.
Page 3-1
Orion Machine Manual
Revision 1.1 AG 360 RoboWrapper
28 June 2017 System Operation
System Operation
Operating Procedures
Charging the AG 360
1. Prior to charging, ensure that the battery connector is attached.
2. Plug the supplied cord to the charging connector.
3. The indicator will show green when unplugged, red when charging, and both green
and red when charging is complete.
Note:
Do not use extension cords. Plug your Flex Stretch-wrapper directly
into an outlet.
Figure 3 - 1
Charging Port

Orion FLEX Series Specifications

General

Brand	Orion
Model	FLEX Series
Category	Stretch Wrapping Systems
Language	English