Orion FLEX Series User Manual

Machine Manual Orion
AG 360 RoboWrapper Revision 1.1
System Operation 28 June 2017
Page 3-4
Steering Spring Tension Release
There is a spring tension release handle located under the battery compartment at the front
of the machine. The handle is on the opposite side of the direction that the machine steers.
This allows the user to have easier control of the machine when moving it manually. To
release the tension, pull the handle out, then press it downward to lock the handle in place.
CAUTION
Ensure the spring tension handle is in place when running in automatic
mode.
Figure 3 - 5
Spring Tension
Release

Orion FLEX Series Specifications

General

Brand	Orion
Model	FLEX Series
Category	Stretch Wrapping Systems
Language	English