Machine Manual Orion
AG 360 RoboWrapper Revision 1.1
System Operation 28 June 2017
Page 3-26
HMI Setup
This is the HMI Setup Screen. This screen allows you to choose the HMI language, set the
screen brightness, adjust the network settings, calibrate the touchscreen touch points, and
set the date and time.
Figure 3 - 27
The HMI Setup
Screen
Table 3-14. The HMI Setup Screen Button Descriptions
STATE 1 DESCRIPTION
DATE/ TIME
Press the numbers to edit the time and date. The format is hours (01-24), minutes
(0-59), seconds (0-59). The date is set by year (####), month (1-12), and day (1-31).
DISPLAY Press this button to go to the Display screen.
SOUNDS Press this button to go to the Sounds adjust screen.
To Next Page
Loading...
