Orion FLEX Series - Safety Line on Safety Lock; Pre-Stretch Ratio Indicator Light

Orion Machine Manual
Revision 1.1 AG 360 RoboWrapper
28 June 2017 System Operation
Page 3-9
3. Check the below items to ensure that the prestretch adjustment is properly locked into
place:
A. The mark line is back to its home position.
B. The lamp indicated the correct pre-stretch percentage.
Note:
There are two pre- stretch percentage ratios, one is 300%, the other is
200%.
Figure 3 - 13
Safety Line on Safety
Lock
Figure 3 - 14
Pre-Stretch Ratio
Indicator Light