Panasonic 2WAY Multi - Page 148

V–29

Outdoor Unit Setting: No. 5 (Level 0) <

>
Key operation is used to perform the outdoor unit setting.
1) Outdoor unit setting display (Level 0)
Displays selection of outdoor unit setting mode at the menu.

2) Outdoor unit setting item select operation (Level 1)
Pressing the SET (S007) key while in the outdoor unit setting display mode activates the following display.
Example :

(Example: Data code 1, engine operation time 1234 hours)
Pressing the UP (S005) and DOWN (S006) keys in this mode makes it possible to select the date code.
3) Outdoor unit setting operation (Level 2)
Setting start operation method : Press the SET (S007) key for one second in the setting data code select
mode.
This activates the forced setting in progress display. (TEST/WARNING
LED light)
Setting change operation method : After entering the setting start operation mode, operating the UP (S005)
and DOWN (S006) keys make it possible to change the setting details
of the selected setting categories.
Setting confi rm operation method : After entering the setting start operation or setting change operation
completed, press the SET (S007) key for one second.
This cancels the forced setting in progress display, making it possible to
once again enter the outdoor unit setting item selection operation mode.
(TEST/WARNING LED off)
Setting cancel operation method : Press the HOME (S004) key for one second before confi rming setting.
This returns operation to normal. (TEST/WARNING LED off)
The setting details will not change when pressing the HOME (S004) key for 1 second during outdoor unit
setting item select operation
GHPtroubleshooting.indbV‒29GHPtroubleshooting.indbV‒29 2012/11/2611:20:202012/11/2611:20:20