Panasonic CF-C1 Series

113
Fingerprint Reader
NOTE
 The data enrolled in the fingerprint sensor is not image data. You cannot restore fingerprint image data from the data
enrolled in the fingerprint sensor.
1 Disable Power-on Security.
A Log on to Windows as an Administrator.
B Click
(Start) / [start] - [All Programs] - [Protector Suite] - [Control Center].
C Click [Identity] - [Status] - [Power-on security status].
D Click [Edit], and remove the check mark from [Enable power-on security], and click [Apply].
E Click [Identity] - [Power-on Password].
F Click [Manage Passwords...].
G Select [Power-On] in [Password Types], and click [Unset password...].
H Enter the Power-On password, and click [OK].
I Click [Close].
• Confirm that fingerprint data is not registered.
2 Delete Fingerprint Data.
Performed by each user.
A Click
(Start) / [start] - [All Programs] - [Protector Suite] - [Control Center].
B Click [Identity] - [Account Operations].
C Click [Delete user data].
• At the confirmation message, click [Yes].
D Enter Windows log on password then, click [Submit].
• Confirm that there is no item in [Password Types].
3 Uninstall Protector Suite.
Performed by the Computer Administrator.
A Log on to Windows as an Administrator.
B Close all programs.
C Click
(Start) / [start] - [Control Panel] - [Uninstall a program].
D Double-click [Protector Suite *.*], and select [Remove].
E Select [Remove all Protector Suite *.* data], and click [Next].
• Uninstallation starts. Follow the on-screen instructions.
F When the “Protector Suite *.* has been successfully uninstalled.” Message appears, click [Finish].
• If the confirmation message appears, click [Yes].
Windows 7
Windows XP
Windows 7
Windows XP
Windows 7
Windows XP