77
CD/DVD Drive
Power-saving mode
If the drive is not accessed for 30 seconds, the drive motor will automatically be shut down to reduce the power consumption.
When the drive is accessed again, the drive motor is turned on. In this case, reading of the disc data will take approximately
30 seconds.
You can change the drive letters for the CD/DVD drive.
A Turn on the CD/DVD drive.
B Click (Start) - [All Programs] - [Panasonic] - [Optical Disc Drive Letter-Setting Utility].
A standard user needs to enter an administrator password.
C Click in [New drive letter], click the drive letter, and click [OK].
D Add a check mark for [In the future, do not show this message.] and click [OK].
A Log on to Windows as an administrator.
B Confirm whether the CD/DVD drive power is on.
If the drive power is off, turn it on.
C Click [start] - [All Programs] - [Panasonic] - [Optical Disc Drive Letter-Setting Utility].
D (Click in [New drive letter], click the drive letter, and click [OK].
NOTE
If you use the Fast User Switching function to log on as a different user while Optical Disc Drive Letter-Setting Utility is
running, you will not be able to start up Optical Disc Drive Letter-Setting Utility form the second user account.
Changing the Internal CD/DVD Drive Letter
Windows 7
Windows XP
To Next Page
Loading...
Need help?
General
