157
Troubleshooting (Advanced)
<Only for CF-C1 Series>
When you want to use the input panel
Touch the screen, Input Panel (a part of) may appears at left side on display.
Click on the taskbar. For information about how to use it, click on the input panel
and click [Help Topics] or
[Tutorial].
Unable to read/write to the hard disk
Your drive or file may not have been properly set.
Check if there is sufficient space on the hard disk.
Check that the account with which you are logged on has read and write permissions.
Your hard disk content may be corrupted. Contact your technical support office.
To check an internal hard disk error
Disconnect all peripheral devices, including the external display, and check a disk error. ( page 149)
<Only for CF-F9 Series>
Cannot boot from internal CD/DVD drive
Check to make sure that the bootable disc is set properly.
Start up the Setup Utility, and confirm the following settings.
• [Optical Drive] is set to [Enabled] in the [Advanced] menu. ( page 138)
• [Optical Drive Power] is set to [On] in the [Main] menu. ( page 137)
• [CD/DVD Drive] is the first device shown in [the boot order] in the [Boot] menu. ( page 141)
When an external CD/DVD drive is connected, you cannot boot from the internal CD/DVD drive.
Problems with Disk and Drive
Windows 7
Windows XP
To Next Page
Loading...
