Panasonic CF-C1 Series

36
Dashboard for CF-C1
 Changing settings and deleting application programs
First log on to Windows as an administrator.
1 Open the Dashboard for CF-C1.
Press (USER) button.
2 Click [Change settings that are currently unavailable].
3 Click [Yes].
4 Click V to the right of [Launch] under the target application program, and select [Change]
to change settings, or [Delete] to delete the application program.
5 If you selected [Change], change the settings and click [OK].
If you selected [Delete], click [Yes].
You can specify functions that can be used by standard users on the Dashboard for CF-C1.
Functions not specified will be dimmed and standard users will not be able to use these functions.
 An administrator must click [Change settings that are currently unavailable] to use these functions.
Log on to Windows as an administrator, and proceed as follows.
1 Click (Start) / [start] - [All Programs] - [Panasonic] - [Dashboard for
CF-C1 settings].
2 Click [Yes].
3 Add a checkmark to the functions you want to specify.
4 Click [OK].
NOTE
 Once you add a checkmark to [Application Launcher Settings], standard users can also perform the above procedure.
Specifying Usable Functions on Dashboard for CF-C1
Windows 7
Windows 7
Windows 7
Windows XP