Panasonic CF-C1 Series

156
Troubleshooting (Advanced)
Pressing a letter key produces a number
 The computer may be in ten-key mode.
If NumLk indicator lights up, press
NumLk , to disable the ten-key mode, and then input.
Only capital letters are being input
 The computer may be in Caps Lock mode.
If Caps Lock indicator lights up, press
Caps Lock , to disable the Caps Lock mode, and then input.
How to input European characters (ß, à, ç etc.), symbols or Euro currency
symbol is unclear
 With the following procedure, enter a character using the code table.
A Click (Start)/ [start] - [All Programs] - [Accessories] - [System Tools] - [Character
Map].
B Point to the desired font name, such as European fonts, and select it.
Combined key operations with the Fn key do not work
 Check whether [Fn/Ctrl Key] is set to [Replace] in the [Main] menu of the Setup Utility. ( page 137).
Change the setting back to [Normal], or if continuing with [Replace] selected, use
Ctrl in place of Fn .
<Only for CF-C1 Series>
Cannot point the correct position using the included digitizer pen
 Perform the screen calibration. ( page 15)
Problems with Input
Windows 7
Windows XP