59
Customizing the Power Setting
Setup
1 Click [start] - [All Programs] - [Panasonic] - [Power Saving Utility].
2 Click [Enable] for each function.
Click [OK] in the confirmation screen that appears.
To enable “Intel video driver power saving function”
Select [Enable], and slide the slide bar to the “Maximum
Battery” end.
3 Click [OK].
Click [Restore initial settings] to return to the factory default
settings, and click [OK].
NOTE
Even if you can enable each function using power saving utility, you can also enable them as follows.
• For how to enable the Intel video driver power saving function.
A Click [start] - [Control Panel] - [Other Control Panel Options] - [Intel(R) Graphics and Media].
B Click [Power].
C Click [Maximum Battery Life].
D Click [Apply].
E Click [OK].
• For how to enable/disable the Wake Up from wired LAN function ( page 121)
To Next Page
Loading...
