Panasonic CF-C1 Series

119
LAN
CAUTION
 To ensure proper network operations, use a twisted pair cable (category 5 or higher) less than 100 m in length.
 Do not use the
sleep/ standby or hibernation during communications (except when the Wake
up from wired LAN function is in use), as this may cause an error in data transmission or reception. The timeout
function may engage even during data transmissions, causing the computer to automatically go into
sleep/
standby or hibernation. When not using the Wake up from wired LAN function, following settings:
[Never] for [Put the computer to sleep:] and [Hibernate after]. ( page 60)
[start] - [Control Panel] - [Performance and Maintenance] - [Power Options] - [Power Schemes]
1 Turn off your computer.
 Do not use sleep/ standby or hibernation.
2 Connect the cable.
Connect the LAN port (A) and the network system (server, HUB, etc.) using a LAN cable.
3 Turn on the computer.
Windows 7
Windows XP
Windows 7
Windows XP
Windows 7
Windows XP
Windows 7
Windows XP
<CF-C1 Series> <CF-F9 Series>