EasyManuals Logo

Panasonic CF-C1 Series User Manual

Panasonic CF-C1 Series
193 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #43 background imageLoading...
Page #43 background image
43
Battery Power
Computer behavior with low battery
The default settings are as follows.
The “Battery Recalibration” function measures and memorizes the battery capacity. To correct the battery display, use this
function to fill the battery and then discharge it completely. Perform the procedure at least once immediately after purchasing
the computer. Normally the interval of “Battery Recalibration” is three months. The battery display may not be correct when
the battery pack deteriorates after a long time use. In this case, perform the procedure again.
1 Connect the AC adaptor.
2 Close all the applications.
3 Perform “Battery Recalibration”.
When the remaining battery power becomes 10%
[Low battery level]/ [Low battery
alarm]
When the remaining battery power becomes 5%
[Critical battery level]/ [Critical
battery alarm]
Displays a message that the remaining battery power is
low.
Displays a message that the remaining battery power is
low, and then the computer enters hibernation.
Charge the battery. Connect the AC adaptor or replace the battery to start up
the computer.
Connect the AC adaptor immediately. If you do not
have the AC adaptor, exit the running programs and
Windows, then confirm that the power indicator is off.
If you have a fully charged spare battery, turn off the
computer, replace the battery and turn the computer on
again.
If another charged battery pack is available, replace the
current battery pack with the charged one.
Connect the AC adaptor and charge the battery.
If you have a fully charged spare battery, turn off the
computer, replace the battery and turn the computer on
again.
When the computer enters hibernation with the battery
down and you resume the operation without charging
the battery, Windows may not start up normally or the
alarm function may not operate normally from then on.
If another charged battery pack is available, replace the
current battery pack with the charged one.
Do not replace the battery pack when the computer is in standby.
Correcting the Battery Display (Battery Recalibration)
Windows 7
Windows XP
Windows 7
Windows XP
Windows XP

Table of Contents

Other manuals for Panasonic CF-C1 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Panasonic CF-C1 Series and is the answer not in the manual?

Panasonic CF-C1 Series Specifications

General IconGeneral
Operating SystemWindows 7 Professional
ProcessorIntel Core i5
StorageSSD
Display12.1-inch
GraphicsIntel HD Graphics
WeightApprox. 1.5 kg
BatteryLithium Ion
WirelessWi-Fi, Bluetooth
PortsUSB, HDMI, VGA, Ethernet, SD card slot

Related product manuals