Panasonic CF-C1 Series

117
Modem
The computer automatically resumes from sleep/ standby when the telephone connected to the
modem rings.
You will need software to keep the computer in an idle state waiting for a phone call, and if you prefer, to turn the computer to
sleep/ standby again afterward. For further information, refer to the instruction manual of the software
application.
1 Click (Start) - [Windows Fax and Scan].
2 Click [Tools] - [Fax Settings].
 A standard user needs to enter an administrator password.
 Check whether the modem you are using is displayed in Device name. If not, click [Select fax device] and select
the correct modem.
3 Add a check mark for [Allow the device to receive fax calls] and click [OK].
4 Click (Start) - [Computer] - [System properties] - [Device Manager].
 A standard user needs to enter an administrator password.
5 Double-click [Modems], and then double-click the internal modem.
6 Click [Power Management] and add a check mark for [Allow this device to wake the
computer], and then click [OK].
1 Click [start] - [Printers and Faxes].
2 Click [Set up faxing] in the [Printer Tasks] area on the left.
 This operation is not necessary next time.
3 Right-click the fax icon and then click [Properties].
4 Click [Devices] - [Properties].
5 Click [Receive], and then add the check mark for [Enable device to receive] and click
[OK].
Ring Resume Function
Windows 7
Windows XP
Windows 7
Windows XP
Windows 7
Windows XP