47
Battery Power
The battery pack is a consumable item so the replacement will be necessary. If the battery operation time becomes noticeably
short and not recovered even after recalibrating the battery, replace with a new battery.
CAUTION
The battery pack is not charged when you first purchase it. Be sure to charge it before using for the first time. Charging
starts automatically when the AC adaptor is connected to the computer.
Use only the specified battery pack with your computer.
In
sleep/ standby, do not remove/replace the battery pack. Otherwise your data will be lost and
the computer may be damaged.
Make sure no foreign objects are under the computer.
<For CF-C1 Series operating on a single battery / CF-F9 Series>
1 Turn off the computer.
Do not use the sleep/ standby function.
2 Turn your computer over and remove/insert the battery pack.
To remove
Slide the latch (for CF-C1 Series) / the left and right latches (for CF-F9 Series) to the unlocked position, and pull
out the battery pack.
To insert
For CF-C1 Series: Slide the battery pack in parallel with the arrow direction until it clicks to the secured position.
For CF-F9 Series: Slide the battery pack in parallel with the arrow direction and attach it so that the left and right
projections on the new battery pack match the dents of the computer.
Replacing the Battery Pack
Windows 7
Windows XP
Windows 7
Windows XP
<CF-C1 Series> <CF-F9 Series>
To Next Page
Loading...
