71
CD/DVD Drive
Turning on or off immediately
There are two methods, as follows.
Slide the drive power/open switch (A) to the left.
• Each time you slide the switch, you will hear a beep and the drive power will turn on or
off.
• If you slide the switch to the right, you will hear a beep and the disc cover will open after
the drive power turns on.
After you hear the beep, it may take a few moments before the drive power turns on/off, or
until the cover opens. (If the speaker is muted, beeps do not sound.)
Using [Extension setting manual temporary switching] in Power Plan Extension Utility.
A Click on the notification area and click .
B Click [On] or [Off] in [Manual switching] of [The optical disc drive’s power].
Using [Manual Switching] of the Optical Disc Drive Power-Saving Utility.
A Click or on the notification area.
B Click [On] or [Off] for [Manual Switching].
NOTE
In the following cases, it is not possible to turn off using [Extension setting editing] / [Manual
Switching]:
• When WinDVD is running
• During writing or reading of a disc
Do not slide the drive power/open switch repeatedly.
The [Auto off setting] of [The optical disc drive’s power] in Power Plan Extension Utility works only for the internal CD/
DVD drive.
When is displayed in the notification area:
Windows 7
Windows XP
Windows 7
Windows XP
Windows 7
Windows XP
To Next Page
Loading...
Need help?
General
