Panasonic CF-C1 Series

180
Hard Disk Data Erase Utility
6 Press F10 .
At the confirmation message, select [Yes] and press Enter .
The computer will restart.
7 Press F2 or Del while [Panasonic] boot screen is displayed.
The Setup Utility starts up.
 If the password is requested, enter the Supervisor Password.
8 Set the Product Recovery DVD-ROM Windows 7 into the CD/DVD drive.
9 <CF-C1 Series>
Select the [Exit] menu, then select your CD/DVD drive in [Boot Override].
<CF-F9 Series>
Select the [Exit] menu, then select [MATSHITAXXXX] in [Boot Override].
10 Press Enter .
The computer restarts.
11 Click [Erase the whole data on the Hard Disk for security] and click [Next].
12 At the confirmation message, click [YES].
13 Click [Continue].
14 Click [Continue] again.
15 Click [YES].
Erasing the hard disk data starts.
16 After erasing is completed, remove the Product Recovery DVD-ROM and click [OK].